Factory Free sample Timber Connector - 4″x6″ Single Tooth Truss Nail Plate – Crown
Factory Free sample Timber Connector - 4″x6″ Single Tooth Truss Nail Plate – Crown Detail:
Roof trusses combine rafters and attic floor joists into a modular triangular unit that replaces the traditional roof framing method. In traditional framing the roof is built stick by stick. With trusses it is possible to prefabricate the pieces needed into modular frames that can be installed every 24 inches to frame a roof with much less time and trouble. The connection between the trusses and the wall top plate is essential to the strength of your new roof. Most building codes require hurricane tie brackets to attach the truss in place to secure it against high winds. Although not always required, best practice and simplicity make them a necessity.
1. Truss nail plates are used to connect two or more timber members together.
2. The truss nail plates comply with AS, ASTM and CE standards.
3. Different zinc coat thickness (80g/m2, 180g/m2 and 275g/m2) for different demand and market.
4. We are wholesaler and OEM manufacturer, both standard and customized sizes are available.
|
Part No. |
Material |
W (mm) |
L (mm) |
Thickness |
|
TPS |
Galvanized steel |
50-200mm |
75-250mm |
0.9/1.0/1.2/1.3/1.5mm 16/17/18/19/20ga |
Product detail pictures:
Related Product Guide:
Our business aims to operating faithfully, serving to all of our clients , and working in new technology and new machine continuously for Factory Free sample Timber Connector - 4″x6″ Single Tooth Truss Nail Plate – Crown, The product will supply to all over the world, such as: South Africa, Paraguay, US, With more and more Chinese products and solutions around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to supply you both better solutions and service, because we've been more and more powerful, specialist and experience in domestic and international.
By Barbara from Gambia - 2017.05.02 11:33
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Hedy from Danish - 2018.09.21 11:01
